Heating and Cooling Properties

These properties also list properties common to Inline Equipment including dampers, silencers, filters, heaters and coolers.

Property Name	Description
Air Intake Diameter	`Positive <numeric value>` Sets outside diameter (D1) of Air Intake connection at End1.
Air Intake Length	`Positive <numeric value>` Sets the straight connection length (L1) at End1.
Air Intake Side Offset	`Positive <numeric value>` Sets offset distance between End1 connect point and side of box. Minimum offset equals radius of Air Intake.
Air Intake Top Offset	`Positive <numeric value>` Sets offset distance between End1 connect point and top of box. Default offset equals radius of Air Intake.
Auto Size	s Sets End1 equal to End2. box `<numeric value>/<numeric value>` Sizes device by solving equations: Body Width=W1+<first numeric value> and Body Depth=D1+<second numeric value> endsequal Confines the device to have equal size connections at each end. Separate combined entries with semi colon.
Body \| Depth	`Positive <numeric value>` Sets box depth independent of End1 and End2. Limited by Auto Size property.
Body \| Length	`Positive <numeric value>` Sets overall length.
Body \| Width	`Positive <numeric value>` Sets box width independent of End1 and End2. Limited by Auto Size property.
Cell Library	`<cell library file name>` Library file name for device cells.
Cell Symbol Name	`<cell name>` Sets the model cell to the device. Prerequisite of proper Cell Library for AHUs.
Connection 1 \| Length (L1)	`Positive <numeric value>` Sets straight length at End1. Sets connection length at End1.
Connection 2 \| Length (L2)	`Positive <numeric value>` Sets straight length at End2. Sets connection length at End2.
Connection \| End Type	fl `-<numeric value>` Sets and sizes end with a flange connection. m `-<numeric value>` Sets and sizes end with a male connection. fe `-<numeric value>` Sets and sizes end with a female connection. Separate End Type entries for each End Spec with a semi colon. Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13
Gas Inlet \| Diameter	`Positive <numeric value>` Sets outside diameter of Gas Inlet.
Gas Inlet \| Side Offset	`Positive <numeric value>` Sets offset distance between Gas Inlet connect point and side of box.

Property Option menus are available to assist in making some property entries.